Single-Phase Modeling and Analysis in EasyPower
EasyPower 10.4 now includes single phase modeling and anlalysis. This includes:
- Single-phase tap from three-phase equipment using a line-to-line or line-to-neutral connection.
- Single-phase tap from single-phase three-wire equipment using a line-to-line or line-to-neutral connection (for example, 120/240V).
- Single-phase short circuit calculations including reports and equipment duty analysis.
- Single-phase arc-flash calculations including reports and labels.
- Single-phase protective device coordination and TCC plots.
- Single-phase design load calculations.